⌚️ Only have 60 seconds?
We know that time is precious and not everyone enjoys reading long articles, as such, we suggest you to watch the following video, however, feel free to still read our article if you want more in-depth information!Related Questions
1Why is my GPU not detected?
There can be a lot of reasons for this problem. The issue could be related to bad drivers, incorrect BIOS settings, hardware problems, or GPU slot issues. A bad graphics card will also cause the issue. The power supply issue could be another reason for this issue.
2How do I get BIOS to recognize my graphics card?
Detect My Graphics Card (BIOS) Navigate through the menu until you find a section labelled On-board Devices, Integrated Peripherals, Advanced or Video. Look for a menu that allows or disables graphics card detection. If it’s disabled, use the menu to enable it; otherwise, leave it alone.
If it’s disabled, use the menu to enable it; otherwise, leave it alone.
3Why are hiveOS not mining?
Since you’ll need to upgrade the AMD drivers, you’ll have to upgrade hiveOS. Also, try to stop the miner and removing your overclock. Click the little broom to go to the overclocking tab. Then start the miner again.
4How do I update Nvidia drivers hiveOS?
It’s very straightforward to upgrade NVIDIA drivers with Hive OS. list of the potential updates, type in the nvidia-driver-update –list command, and then type in the Hive OS to upgrade the NVIDIA drivers.
5Why does my GPU turn on but no Display?
If your display is black or you notice any graphics-related problems, it is likely that your CPU isn’t getting enough horsepower. The GPU is one of the most power-hungry components of a computer system, so you should make sure your CPU isn’t underpowered, as well as the GPU.
6How do I enable GPU in BIOS?
Setting GPU Configurations.
– From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > PCIe Device Configuration > GPU CFG Selection.
– Select an option. 4:1—Maps 4 PCIe slots to each installed processor. 8:1—Maps all slots to a single processor.
– Save your settings.
– From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > PCIe Device Configuration > GPU CFG Selection.
– Select an option. 4:1—Maps 4 PCIe slots to each installed processor. 8:1—Maps all slots to a single processor.
– Save your settings.
7How do I enable PCI slots in BIOS?
Enabling or disabling PCIe Slot Network Boot.
– From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options > Network Boot Options > PCIe Slot Network Boot.
– Select a PCIe slot entry.
– Select a setting.
– Save your changes.
– From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options > Network Boot Options > PCIe Slot Network Boot.
– Select a PCIe slot entry.
– Select a setting.
– Save your changes.
8How do I know if my GPU is seated?
With the PC on its side, make sure that the GPU is still in place. The GPU will have a very slight side to side flex. However, the motherboard should not pop up and down in the slot against the motherboard. With the GPU installed, the lock or latch is very difficult to see and clearly.
9Is Hive OS down today?
No incidents reported today.
10What should I mine with Hive OS?
Mining is possible on ASICS, GPU Rigs, and CPUs, according to the Hive OS system. It also has its own pool and is compatible with many other popular pools where you can mine ETH and ETC.
11Can you mine Ergo on Hive OS?
https://www.youtube.com/watch?v=7JQV1WQ5bmY
12Which Nvidia driver is best for mining?
The 472.12 version is the best Nvidia miner for mining among the many Nvidia mining drivers released over the years. It works on Windows 10 and 11, and it has video card support for the Geforce RTX 30 series and below, as well as the titan series.
13How do I update my Nvidia graphics driver?
How do I configure NVIDIA Update?.
– The first way is via the NVIDIA Control Panel. Right-click on the windows desktop and select NVIDIA Control Panel.
– The second way is via the new NVIDIA logo in the windows system tray. Right-click on the logo and select Check for updates or Update preferences.
– The first way is via the NVIDIA Control Panel. Right-click on the windows desktop and select NVIDIA Control Panel.
– The second way is via the new NVIDIA logo in the windows system tray. Right-click on the logo and select Check for updates or Update preferences.
14How do I update my hive AMD?
https://www.youtube.com/watch?v=PCCNhMIoWww
15Why is GPU not outputting video?
First and foremost, check where your video cable is plugged in. If your graphics card is working properly, you’ll need your video cable to the output port of the graphics card, not to the motherboard’s output port.